User Tools
Sidebar
adjusting_v_slot_wheels
Adjusting V slot wheels
If the wheels are either pressed too far INTO or AWAY from the frame, you will have issues.
To adjust the wheels, use the spanner wrench that was included with the printer to turn the eccentric nuts that are connected to the wheels. Take your time with this and get it perfect. You want the build plate to be snug on the rail and with minimal side to side play.
adjusting_v_slot_wheels.txt · Last modified: 2017/11/22 19:53 by admin
Except where otherwise noted, content on this wiki is licensed under the following license: Public Domain
