====== Routine Maintenance ======

  * Clean your nozzle (do cold pulls until clean). 
  * Clean your bed. 
  * Check you have left no residue around the printer. 
  * Check belt tension. 
  * Once in a while redo your calibration. 
  * Recheck level, that is a long time for all that shaking to maybe move your leveling screws.
  * Check all wheels. Not only the eccentric nuts but also the wheel it self.
  * Use this [[http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide|Calibration Guide]]
    * Or you can use this one [[http://zennmaster.com/makingstuff/reprap-101-calibrating-your-extruder-part-1-e-steps|RepRap Calibrating 101]]